Differences

This shows you the differences between two versions of the page.

--- usb-c_breakout_board [2022/03/11 10:29] – add pictures kingkevin
+++ usb-c_breakout_board [2022/03/11 10:51] – [design choice] typo kingkevin
@@ Line 15: / Line 15: @@
 For easy access to the pins I wanted standard 2.54 mm/100 mil headers.
 So it can also be used to design or test devices I want it to be breadboard friendly (at least 400 mil spacing between the columns).
-To be able to tap signal or be man in the middle, I wanted them to be stackable (same form factor an pinout for plug and receptacle).
+To be able to tap signal or be man in the middle, I wanted them to be stackable (same form factor and pinout for plug and receptacle).
 You can already find USB-C breakout boards on AliExpress, but none fitted all aforementioned requirements.
@@ Line 36: / Line 36: @@
 I used USB-C plug and receptacle from LCSC (details are in the BOM).
-They are readily available, cheap, and well documented.
+They are readily available, and cheap.
 But the footprint is fairly generic, and fits with the one specified in the USB Type-C standard.
 Thus compatible connectors from other manufacturer are available.
+===== release =====
+  * {{ :usb-c_breakout_board:usb-c_breakout_board_v2.zip |version 2 production and source files}}.
+  * version 1 had errors in the silk screen.
 ===== testing =====