CuVoodoo

the sorcery of copper

User Tools

Site Tools

Trace:
spark_counter

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
spark_counter [2017/02/03 15:34] – mention spark abacus kingkevinspark_counter [2024/01/07 17:49] (current) – external edit 127.0.0.1
Line 97: Line 97:
  
 USART to query the power meter, SPI to communicate with the nRF24L01+, and the nRF24L01+ protocol are implemented in C (using a lot of interrupts). USART to query the power meter, SPI to communicate with the nRF24L01+, and the nRF24L01+ protocol are implemented in C (using a lot of interrupts).
-The source code is available [[https://git.cuvoodoo.info/spark_counter/|in this git]].+The source code is available [[https://git.cuvoodoo.info/kingkevin/spark_counter/|in this git]].
 I prefer directly writing in the registers as described in the [[http://www.atmel.com/images/Atmel-8271-8-bit-AVR-Microcontroller-ATmega48A-48PA-88A-88PA-168A-168PA-328-328P_datasheet_Complete.pdf|datasheet]] rather than using an [[https://www.arduino.cc/en/Main/Software|abstract IDE]] and [[https://github.com/TMRh20/RF24|libraries]]. I prefer directly writing in the registers as described in the [[http://www.atmel.com/images/Atmel-8271-8-bit-AVR-Microcontroller-ATmega48A-48PA-88A-88PA-168A-168PA-328-328P_datasheet_Complete.pdf|datasheet]] rather than using an [[https://www.arduino.cc/en/Main/Software|abstract IDE]] and [[https://github.com/TMRh20/RF24|libraries]].
 This way I learn how it works in details. This way I learn how it works in details.
Line 121: Line 121:
  
 On the [[#ATmega328P|micro-controller]] side I implemented the complete SPI-based protocol using the [[https://www.nordicsemi.com/eng/content/download/2726/34069/file/nRF24L01P_Product_Specification_1_0.pdf|datasheet]]. On the [[#ATmega328P|micro-controller]] side I implemented the complete SPI-based protocol using the [[https://www.nordicsemi.com/eng/content/download/2726/34069/file/nRF24L01P_Product_Specification_1_0.pdf|datasheet]].
-The source code is available [[https://git.cuvoodoo.info/spark_counter/|in this git]].+The source code is available [[https://git.cuvoodoo.info/kingkevin/spark_counter/|in this git]].
  
 On the [[#Raspberry Pi|computer]] side I use the [[https://github.com/TMRh20/RF24|RF24 library]]. On the [[#Raspberry Pi|computer]] side I use the [[https://github.com/TMRh20/RF24|RF24 library]].
Line 135: Line 135:
  
 To receive the measurements I used a [[#nRF24L01+|nRF24L01+ transceiver]] with the [[https://github.com/TMRh20/RF24|RF24 library]]. To receive the measurements I used a [[#nRF24L01+|nRF24L01+ transceiver]] with the [[https://github.com/TMRh20/RF24|RF24 library]].
-The source code is available [[https://git.cuvoodoo.info/spark_counter/|in this git]].+The source code is available [[https://git.cuvoodoo.info/kingkevin/spark_counter/|in this git]].
  
 [[http://elinux.org/RPi_Low-level_peripherals#P1_Header|RPi]] - nRF24L01+ connection: [[http://elinux.org/RPi_Low-level_peripherals#P1_Header|RPi]] - nRF24L01+ connection:
spark_counter.1486136098.txt.gz · Last modified: 2024/01/07 17:49 (external edit)

Page Tools

Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
CC Attribution-Share Alike 4.0 International Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki Privacy Policy