CuVoodoo

the sorcery of copper

User Tools

Site Tools


led_clock

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
led_clock [2017/10/13 14:13]
kingkevin link old firmware
led_clock [2022/02/10 11:59] (current)
kingkevin update git links
Line 7: Line 7:
 For that you will need: For that you will need:
   * WS2812b RGB LEDs strip (long enough to go around the clock)   * WS2812b RGB LEDs strip (long enough to go around the clock)
-  * development board with a STM32F103 micro-controller and 32.768 kHz oscillator for the Real Time Clock (such as the blue pill), or external RTC module such as the I2C DS1307 (only supported in the [[https://git.cuvoodoo.info/led_clock-old/|old firmware]])+  * development board with a STM32F103 micro-controller and 32.768 kHz oscillator for the Real Time Clock (such as the blue pill), or external RTC module such as the I2C DS1307 (only supported in the [[https://git.cuvoodoo.info/kingkevin/led_clock-old|old firmware]])
   * coin cell battery to keep the RTC running (optional)   * coin cell battery to keep the RTC running (optional)
   * GL5528 photo-resistor to adjust the LED brightness (optional)   * GL5528 photo-resistor to adjust the LED brightness (optional)
   * DCF77 to automatically update the time (recommended)   * DCF77 to automatically update the time (recommended)
  
-More details about the project can be found in the [[https://git.cuvoodoo.info/led_clock/about/|README]].\\ +More details about the project can be found in the [[https://git.cuvoodoo.info/kingkevin/stm32f1/src/branch/led_clock/README.md|README]].\\ 
-The code for the micro-controller is available on [[https://git.cuvoodoo.info/led_clock/|git]].+The code for the micro-controller is available on [[https://git.cuvoodoo.info/kingkevin/stm32f1/src/branch/led_clock|git]].
 It includes the script to compile the code, flash the firmware, and generate the source documentation is included.\\ It includes the script to compile the code, flash the firmware, and generate the source documentation is included.\\
 A release with sources, compiled firmware, and documentation is available {{:led_clock:led_clock-release.tar.bz2|here}}. A release with sources, compiled firmware, and documentation is available {{:led_clock:led_clock-release.tar.bz2|here}}.
led_clock.txt · Last modified: 2022/02/10 11:59 by kingkevin