Differences

This shows you the differences between two versions of the page.

--- ea-ps_2084-03b [2015/07/29 16:27] – [acquisition] update link kingkevin
+++ ea-ps_2084-03b [2022/02/10 11:56] – update git links kingkevin
@@ Line 52: / Line 52: @@
 To control the power supply I implemented the protocol described in the {{:ea-ps_2084-03b:ps2000b_programming.pdf|programming manual}}.
-The source code is available on [[https://git.cuvoodoo.info/kingkevin/ea-ps_2084-03b/tree/master|git]].
+The source code is available on [[https://git.cuvoodoo.info/kingkevin/ea-ps_2084-03b/|git]].
-The [[https://git.cuvoodoo.info/kingkevin/ea-ps_2084-03b/blob/master/control.rb|control]] programming will increment the voltage from 0 to 84 V in 0.1 V steps, at 1.0 A.
+The [[https://git.cuvoodoo.info/kingkevin/ea-ps_2084-03b/src/branch/master/control.rb|control]] programming will increment the voltage from 0 to 84 V in 0.1 V steps, at 1.0 A.
 It will set the voltage and current which are set, actual (measured by the power supply), and [[#mutlimeter|measured]] (measured by the DMM)
-Using [[https://git.cuvoodoo.info/kingkevin/ea-ps_2084-03b/blob/master/probe.rb|this script]] I could also find the following undocumented objects (for commands): 80, 81, 82, 83, 84, 85, 86, 87, 88, 149, 150, 151, 152, 156, 158, 160, 161, 162.
+Using [[https://git.cuvoodoo.info/kingkevin/ea-ps_2084-03b/src/branch/master/probe.rb|this script]] I could also find the following undocumented objects (for commands): 80, 81, 82, 83, 84, 85, 86, 87, 88, 149, 150, 151, 152, 156, 158, 160, 161, 162.
 These probably allow you to flash the firmware or calibrate the power supply.
 ===== multimeter =====