CuVoodoo

the sorcery of copper

User Tools

Site Tools


busvoodoo_history

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
busvoodoo_history [2017/12/23 10:06] – add firmware kingkevinbusvoodoo_history [2018/03/11 22:28] (current) – delete page kingkevin
Line 1: Line 1:
-====== firmware ====== 
- 
-There is no firmware release yet. 
-The code is under heavy development. 
- 
-====== hardware ====== 
- 
-version numbering scheme: **x**.//yyy// 
-  * **x** is the major design identifier: 0 is for the prototype, A to Z afterwards (distinguishing it from the firmware version) 
-  * //y// is the revision number: it is absolute and indicates how many changes (e.g. commits) have been done on the schematic and board layout 
- 
-For a summary of the changes have a look at the [[https://git.cuvoodoo.info/busvoodoo_hardware/tree/CHANGES.txt|changelog]].\\ 
-For a detailed description of the changes have a look at the [[https://git.cuvoodoo.info/busvoodoo_hardware/log/|commit logs]] of the [[https://git.cuvoodoo.info/busvoodoo_hardware/log/BusVoodoo.sch|schematic]] and [[https://git.cuvoodoo.info/busvoodoo_hardware/log/BusVoodoo.pcb|board layout]]. 
- 
-===== v0.018 ===== 
- 
-The second prototype ({{ :busvoodoo:hardware-release_v0.018.tar.gz |schematic and board layout}}).\\ 
-Except for CAN and the boost regulator, everything is working. 
- 
-The light version: 
- 
-{{:busvoodoo:mini_v0.018_light-1_front.jpg?400|}} 
-{{:busvoodoo:mini_v0.018_light-1_back.jpg?400|}} 
- 
-The full version (without CAN): 
- 
-{{:busvoodoo:mini_v0.018_full-2_front.jpg?400|}} 
-{{:busvoodoo:mini_v0.018_full-2_back.jpg?400|}} 
- 
-The full version, with CAN rework: 
- 
-{{:busvoodoo:mini_v0.018_full-corrected_front.jpg?400|}} 
-{{:busvoodoo:mini_v0.018_full-corrected_back.jpg?400|}} 
- 
-===== v0.001 ===== 
- 
-The very first prototype ({{ :busvoodoo:hardware-release_v0.001.tar.gz |schematic and board layout}}).\\ 
-The micro-controller part was working, but there were a lot of mistakes with the rest: 
-  * wrong transistor pinout 
-  * common pull-up rail 
-  * 5V RS-232 transceiver operated at 3.3V (and not working) 
-  * shared pins between the RS and CAN tansceivers 
- 
-The light version: 
- 
-{{:busvoodoo:mini_v0.001_light_front.jpg?400|}} 
-{{:busvoodoo:mini_v0.001_light_back.jpg?400|}} 
- 
-The full version: 
- 
-{{:busvoodoo:mini_v0.001_full_front.jpg?400|}} 
-{{:busvoodoo:mini_v0.001_full_back.jpg?400|}} 
- 
  
busvoodoo_history.1514023592.txt.gz · Last modified: 2024/01/07 17:49 (external edit)