Differences

This shows you the differences between two versions of the page.

--- jtag [2017/04/25 14:03] – [Baite] kingkevin
+++ jtag [2017/04/25 14:05] – [Baite] kingkevin
@@ Line 111: / Line 111: @@
 {{:jtag:reverse-gnd_internal-back.jpg?0x100|}}
-From the outside this looks very similar to the previous one, except that the connector pinout is very different (except for power).\\
+From the outside this looks very similar to the previous one, except that the connector pinout is very different (except for power) and there is only one LED.\\
 No markings are on the board.
@@ Line 135: / Line 135: @@
 {{:jtag:st-link_v2_baite.svg?0x100|pinout}}
-I've also reversed the board layout to get the {{:jtag:baite_schematic.pdf|schematic}}.
+I've also reversed the board layout to get the {{:jtag:baite.pdf|schematic}}.
 The connector pins are all protected with 220 ohms resistors.