jtag
Differences
This shows you the differences between two versions of the page.
Both sides previous revisionPrevious revisionNext revision | Previous revisionNext revisionBoth sides next revision | ||
jtag [2016/01/13 09:02] – [Altera USB-Blaster (clone)] kingkevin | jtag [2016/01/13 10:19] – [scan chain] kingkevin | ||
---|---|---|---|
Line 167: | Line 167: | ||
Thus it sometimes is useful to just list the TAPs available on a chain to know which devices are present. | Thus it sometimes is useful to just list the TAPs available on a chain to know which devices are present. | ||
- | This is easily done with urJTAG: | + | This is easily done with urJTAG |
<code bash> | <code bash> | ||
jtag | jtag | ||
Line 213: | Line 213: | ||
Warn : AUTO auto1.tap - use "jtag newtap auto1 tap -irlen 5 -expected-id 0x16410041" | Warn : AUTO auto1.tap - use "jtag newtap auto1 tap -irlen 5 -expected-id 0x16410041" | ||
Warn : gdb services need one or more targets defined | Warn : gdb services need one or more targets defined | ||
+ | </ | ||
+ | |||
+ | '' | ||
+ | |||
+ | While the ST-Link v2 is mainly meant to be used as SWD adapter, it also supports JTAG. Both are implemented with the High Level Adapter (HLA) driver. But it seems scan chain is [[http:// | ||
+ | <code bash> | ||
+ | openocd --file interface/ | ||
+ | |||
+ | Open On-Chip Debugger 0.10.0-dev-00189-g554313b (2016-01-12-16: | ||
+ | Licensed under GNU GPL v2 | ||
+ | For bug reports, read | ||
+ | http:// | ||
+ | hla_jtag | ||
+ | adapter speed: 100 kHz | ||
+ | Info : clock speed 100 kHz | ||
+ | Error: BUG: current_target out of bounds | ||
</ | </ |
jtag.txt · Last modified: 2024/01/07 17:49 by 127.0.0.1