Differences

This shows you the differences between two versions of the page.

--- ea-ps_2084-03b [2015/05/27 18:45] – [mutli-meter] kingkevin
+++ ea-ps_2084-03b [2015/05/27 18:47] – typo kingkevin
@@ Line 51: / Line 51: @@
 The [[https://git.cuvoodoo.info/kingkevin/ea-ps_2084-03b/blob/master/control.rb|control]] programming will increment the voltage from 0 to 84 V in 0.1 V steps, at 1.0 A.
-It will set the voltage and current which are set, actual (measured by the power supply), and [[#mutli-meter|measured]] (measured by the DMM)
+It will set the voltage and current which are set, actual (measured by the power supply), and [[#mutlimeter|measured]] (measured by the DMM)
-===== multi-meter =====
+===== multimeter =====
 To measure the output of the power supply I used two [[http://uni-trend.com/UT61E.html|UNI-T UT61E]].
-These are good multimeters for electronics which you can get [[http://www.aliexpress.com/wholesale?catId=0&SearchText=uni-t+ut61e|quite cheap]], with 22000 counts, and offer connection to the PC.
+These are good multimeters for electronics which you can get [[http://www.aliexpress.com/wholesale?catId=0&SearchText=uni-t+ut61e|quite cheap]], with 22000 counts, and a connection to the PC.
 More functions and its accuracy are available in the [[http://uni-trend.com/manual2/UT61English.pdf|manual]] ({{:ea-ps_2084-03b:ut61english.pdf|archive}}).