Differences

This shows you the differences between two versions of the page.

--- dump_spi_flash [2021/04/14 19:12] – [in-circuit] kingkevin
+++ dump_spi_flash [2021/04/14 19:14] – [J-Link] kingkevin
@@ Line 228: / Line 228: @@
 Note that you need hardware [[https://wiki.segger.com/Software_and_Hardware_Features_Overview|version 10 or later]].
-Hardware version 8 does not support SPI flashing, and version 9 releases nCS just before talking to the chip (this seems to be an issue [[https://www.segger.com/downloads/jlink/ReleaseNotes_JLink.html|fixed for version 10 with software version 6.86c from 2020-10-06]] but is still present as of 2021-04-14 with firmware version 2021-02-02 and software version 7.00 from 2021-04-08).
+Hardware version 8 does not support SPI flashing, and version 9 releases nCS just before talking to the chip (this seems to be an issue [[https://www.segger.com/downloads/jlink/ReleaseNotes_JLink.html|fixed for version 10 with software version 6.86c from 2020-10-06]] but is still present as of 2021-04-14 with firmware version 2021-02-02 and software version 7.00 from 2021-04-08, and setting CS in the init steps does not solve the issue).